Phone Provisioning
75
Settings->Auto Provision->Interval(Minutes)
static.auto_provision.weekly.enable
It triggers the weekly feature to on or off.
0-Off
1-On, the IP phone will perform an auto provisioning process weekly.
Settings->Auto Provision->Weekly
static.auto_provision.weekly_upgrade_interval
It configures the time interval (in weeks) for the IP phone to perform auto
provisioning.
If it is set to 0, the IP phone will perform auto provisioning at the specific day(s)
configured by the parameter “static.auto_provision.weekly.dayofweek” every week.
If it is set to other values (for example, 3), the IP phone will perform auto provisioning
at a random day between the specific day(s) configured by the parameter
“static.auto_provision.weekly.dayofweek” every three weeks.
Note: It works only if “static.auto_provision.weekly.enable” is set to 1 (On).
Settings->Auto Provision->Weekly Upgrade Interval(0~12week)
static.auto_provision.inactivity_time_expire
It configures the delay time (in minutes) to perform auto provisioning when the IP
phone is inactive at regular week.
If it is set to 0, the IP phone will perform auto provisioning at random between a
starting time configured by the parameter “static.auto_provision.weekly.begin_time”
and an ending time configured by the parameter
“static.auto_provision.weekly.end_time”.
If it is set to other values (for example, 60), the IP phone will perform auto provisioning
only when the IP phone has been inactivated for 60 minutes (1 hour) between the
starting time and ending time.
Note: The IP phone may perform auto provisioning when you are using the IP phone
on office hour. It works only if “static.auto_provision.weekly.enable” is set to 1 (On).
To Next Page
Loading...
Need help?
General
