EasyManuals Logo

Yealink T40G Administrator's Guide

Yealink T40G
622 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
Phone Provisioning
77
with every reboot.
Permitted
Values
0-Off
1-On, the IP phone will perform auto provisioning at random between a starting time
configured by the parameter "static.auto_provision.flexible.begin_time" and an ending
time configured by the parameter "static.auto_provision.flexible.end_time" on a
random day within the period configured by the parameter
"static.auto_provision.flexible.interval".
Default
0
Web UI
Settings->Auto Provision->Flexible Auto Provision
Parameter
static.auto_provision.flexible.interval
<y0000000000xx>.cfg
Description
It configures the interval (in days) for the IP phone to perform auto provisioning.
The auto provisioning occurs on a random day within this period based on the
phone's MAC address.
Example:
static.auto_provision.flexible.interval = 30
The IP phone will perform auto provisioning on a random day (for example, 18) based
on the phone's MAC address.
Note: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).
Permitted
Values
Integer from 1 to 1000
Default
30
Web UI
Settings->Auto Provision->Flexible Interval Days
Parameter
static.auto_provision.flexible.begin_time
<y0000000000xx>.cfg
Description
It configures the starting time of the day for the IP phone to perform auto
provisioning at random.
Note: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).
Permitted
Values
Time from 00:00 to 23:59
Default
02:00
Web UI
Settings->Auto Provision->Flexible Time
Parameter
static.auto_provision.flexible.end_time
<y0000000000xx>.cfg
Description
It configures the ending time of the day for the IP phone to perform auto provisioning
at random.
If it is left blank or set to a specific value equal to starting time configured by the
parameter “static.auto_provision.weekly.begin_time”, the IP phone will perform auto

Table of Contents

Other manuals for Yealink T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink T40G and is the answer not in the manual?

Yealink T40G Specifications

General IconGeneral
SIP Accounts3
Wall MountableYes
Opus CodecNo
Display2.3 inch 132x64-pixel graphical LCD
NetworkDual-port Gigabit Ethernet
PoEYes
Headset SupportYes, RJ9 port
Power AdapterOptional
Voice CodecsG.722, G.711(A/μ), G.729AB, G.726
Local Phonebook1000 entries

Related product manuals