11-7
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating Custom Reports/Database
• All Elements tree in the right box
After clicking All Elements in the right box, you can select the items under the
Quant Element and Quant Element (Replicate Data) tree in the left box and add
to the All Elements tree in the right box. It enables you to layout data for all ele-
ments by selecting one item.
When Raw Counts/CPS is selected under the Quant Element (Replicate Data)
tree in Possible Items for Report, “Raw Counts/CPS” appears under the All Ele-
ments tree. When a report is created, the data is displayed according to the setting
of Max Replicate Output.
6 When you have selected all the necessary items from the left box, Click OK.
The Custom report template appears.
Custom Report Template - Full Quant Mode
When Template>>Load new data file is selected, ChemStation updates these links
to show the new information.
NOTE The Script box in the Font dialog box (Format>>Font), is not applicable on the
Custom report.
To Next Page
Loading...
