Agilent Technologies 7500 ICP-MS - Page 575

18-45
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Installing the Agilent 7500 ChemStation Software (Windows XP)
12 Set the following items and click OK.
• Name: Type in “Bootp Client 68 TCP.”
• Port Number: Type in “68.”
• Click to select TCP or UDP. Here, select TCP.
13 Follow Steps 11 and 12 to add three more ports.
Name Port No. TCP/UDP
Bootp Client 68 TCP 68 TCP Done
Bootp Client 68 UDP 68 UDP Add
Bootp Server 67 TCP 67 TCP Add
Bootp Server 67 UDP 67 UDP Add