Agilent Technologies EXA N9010A - Page 41

40
Compatible SCPI Commands
SCPI Summary Table
CALCulate<1|2>:LIMit<1...8>:COPY 1 to 8 |
<name>
FSE/FSP/FSU Yes Do not support the
parameter option <name>
CALCulate<1|2>:LIMit<1...8>:NAME <name of
limit line>
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:DELete FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ESPectrum:MOD
E AUTO | MANual | USER
FSP
Accepted
b
CALCulate<1|2>:LIMit<1...8>:ESPectrum:VALu
e <numeric_value>
FSP Accepted
CALCulate<1|2>:LIMit<1...8>:ESPectrum:REST
ore
FSP Accepted
CALCulate<1|2>:LIMit<1...8>:ACPower[:STATe
]
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ACPower:ACHan
nel[:RELative]
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ACPower:ACHan
nel[:RELative]:STATe
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ACPower:ACHan
nel:ABSolute
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ACPower:ACHan
nel:ABSolute:STATe
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ACPower:ACHan
nel:RESult?
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ACPower:ALTern
ate<1|2>[:RELative]
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ACPower:ALTern
ate<1|2>[:RELative]:STATe
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ACPower:ALTern
ate<1|2>:ABSolute
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ACPower:ALTern
ate<1|2>:ABSolute:STATe
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:ACPower:ALTern
ate<1|2>:RESult?
FSE/FSP/FSU Yes
CALCulate<1|2>:LIMit<1...8>:CONTrol[:DATA]
<numeric_value>,<numeric_value>...
FSE/FSP/FSU Yes
Table 3-1 SCPI Commands Summary Table
SCPI Command Corresponding
Model
Support Notes
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html