Agilent Technologies EXA N9010A - Page 53

52
Compatible SCPI Commands
SCPI Summary Table
[SENSe<1|2>:]SWEep:EGATe:POLarity
POSitive | NEGative
FSE/FSP/FSU Yes
[SENSe<1|2>:]SWEep:EGATe:HOLDoff 125 ns
to 100 s
FSE/FSP/FSU Yes
[SENSe<1|2>:]SWEep:EGATe:LENGth 0 to 100
s
FSE/FSP/FSU Yes
[SENSe<1|2>:]SWEep:EGATe:SOURce
EXTernal | IFPower | RFPower
FSE/FSP/FSU Yes
[SENSe<1|2>:]SWEep:POINts 125 to 8001 FSP/FSU Yes
STATus:OPERation[:EVENt]? FSE/FSP/FSU Yes
STATus:OPERation:CONDition? FSE/FSP/FSU Yes
STATus:OPERation:ENABle FSE/FSP/FSU Yes Max = 32767
STATus:OPERation:PTRansition FSE/FSP/FSU Yes Max = 32767
STATus:OPERation:NTRansition FSE/FSP/FSU Yes Max = 32767
STATus:PRESet FSE/FSP/FSU Yes
STATus:QUEStionable[:EVENt] FSE/FSP/FSU Yes
STATus:QUEStionable:CONDition FSE/FSP/FSU Yes
STATus:QUEStionable:ENABle FSE/FSP/FSU Yes Max = 32767
STATus:QUEStionable:PTRansition FSE/FSP/FSU Yes Max = 32767
STATus:QUEStionable:NTRansition FSE/FSP/FSU Yes Max = 32767
STATus:QUEStionable:FREQuency[:EVENt] FSE/FSP/FSU Yes
STATus:QUEStionable:FREQuency:CONDition FSE/FSP/FSU Yes
STATus:QUEStionable:FREQuency:ENABle FSE/FSP/FSU Yes Max = 32767
STATus:QUEStionable:FREQuency:PTRansition FSE/FSP/FSU Yes Max = 32767
STATus:QUEStionable:FREQuency:NTRansition FSE/FSP/FSU Yes Max = 32767
STATus:QUEue[:NEXT]? FSE/FSP/FSU Yes Agilent supports its own
Error messages. See
Instrument Messages for
more details.
SYSTem:COMMunicate:GPIB[:SELF]:ADDRes
s
FSE/FSP/FSU Yes
Table 3-1 SCPI Commands Summary Table
SCPI Command Corresponding
Model
Support Notes
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html