Allied Telesis SwitchBlade x3100 Series - Show System Time

Configuring SNTP Introduction
1-87
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
SHOW SYSTEM TIME
Syntax
SHOW SYSTEM TIME [FULL]
Description Displays the current date and time that the system is using
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
SHOW SYSTEM TIME FULL
--- System Time ---
Date................................. 2010-03-25
Time................................. 11:12:29 (STANDARD)
Current UTC Offset................... +00:00:00
Day Light Saving
Status............................. OFF
Timezone........................... CUSTOM
Start.............................. -
End................................ -
DST UTC Offset..................... +00:00:00
Standard UTC Offset................ +00:00:00
SNTP Settings
Status............................. OFF
Option Description Default Value
FULL Includes all of the time attributes (UTC Offset, Daylight
Savings Time settings, SNTP setting as ON or OFF