Allied Telesis SwitchBlade x3100 Series - Layer Two Switching

Introduction
4-1
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4. Layer Two Switching
4.1 Introduction
The Layer 2 functionality of the SBx3112 includes the following:
• Switching
• Switching Command List
• Link Aggregation (LAG)
• LAG Command List
• VLAN (802.3)
• VLAN Command List
• Spanning Tree Introduction: STP, RSTP, MSTP and BPDU Cop
• Spanning Tree Command List
• Ethernet Protection Switched Ring (EPSR) and SuperLoop Prevention
• EPSR and SuperLoop Command List
• Upstream Forwarding Only (UFO) Mode
• Upstream Control Protocol (UCP)
• HVLAN (Port Based and VLAN Based)
• HVLAN Command List
• VLAN Translation
• VLAN Translation Command List