Allied Telesis SwitchBlade x3100 Series - Snmp Command List

Configuring an SNMP Community Introduction
7-55
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7.3.7 SNMP Command List
The following tables list the commands available to configure and manage SNMP on the SBx3112 switch.
TABLE 7-7 SNMP Commands
Commands
ADD SNMP COMMUNITY (SEC)
CREATE SNMP COMMUNITY (SEC)
DELETE SNMP COMMUNITY (SEC)
DESTROY SNMP COMMUNITY (SEC)
DISABLE SNMP (SEC)
DISABLE SNMP AUTHENTICATE_TRAP (SEC)
DISABLE SNMP COMMUNITY (SEC)
ENABLE SNMP (SEC)
ENABLE SNMP AUTHENTICATE_TRAP (SEC)
ENABLE SNMP COMMUNITY (SEC)
SET SNMP COMMUNITY (SEC)
SHOW SNMP (SEC)
SHOW SNMP COMMUNITY (SEC)