Example Output GE Interfaces
2-19
Software Reference for SwitchBlade x3100 Series Switches (Interface Management)
SHOW INTERFACE
Syntax
SHOW INTERFACE [ ={ type: | type:id-range | id-range | ifname-list
| ALL } ] [ CARD=slot-list ] [ STATE={ UP | DOWN | ALL } ]
[ DIRECTION={ NETWORK | CUSTOMER | INTERNAL } ]
[ DESCRIPTION ] [ FULL ]
Description Displays information about interfaces in the system. Information provided includes inter-
face type, interface ID, interface name, physical ports associated with the interface, inter-
face direction, interface mode (UP or DOWN) and the last change time (based on the
system uptime).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
E135 - manager SEC>> SHOW INTERFACE CARD=1
--- GE Interfaces ---
Option Description Default Value
INTERFACE The interfaces that will have information displayed. ALL
CARD The slot number for the card interfaces to display.
STATE The state of the interfaces:
- UP - Operationally UP
- DOWN- Operationally DOWN (The Admin state can
be UP or DOWN).
- ALL - Both UP and DOWN
DIRECTION NETWORK - The interface is toward another system,
and so data packets from multiple customers are carried
over the link.
CUSTOMER - The interface is toward a customer site
and all data streams are associated with the customer.
DESCRIP-
TION
Includes the DESCRIPTION value for the displayed
interfaces.
FULL Gives complete information for each interface type
To Next Page
Loading...
Need help?
General
