Allied Telesis SwitchBlade x3100 Series - Default Chapter; Creating an Entity

Custom Profiles Introduction
1-229
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1.17.3.1 Creating an Entity
When creating a card, the user has the option to CREATE the card and associate it with a Profile. If the user
does not include a Profile (that exists), the card and its associated entities (interfaces) will have <none> as the
associated Profile.
>CREATE CARD=3 GE24POE
>SHOW INTERFACE 3.0
--- GE Interfaces ---
Interface.......................... 3.0
Type............................... GE
State.............................. UP-DN-Dependency
Description........................ <none>
Remote ID.......................... <none>
External Profile................... <none>
Card Type.......................... GE24POE
Provisioning
Provisioning Profile............ <none>
Direction....................... Customer
------------------------------------
The user could now create a new Profile (silver) with changed attributes, and SET the interface (3.0) to this Pro-
file. As a result, the interface will be associated with the silver profile and have its attributes.
>CREATE PROFILE SILVER GEPORT FLOWCONTROL=ON
Info (033561): Successfully created profile(s) SILVER
>SHOW PROFILE NAMES
--- Card Profiles ---
------------------------------------
--- Port Profiles ---
Name Type
-------------------------------- ----------
AutoProv GEPORT
SILVER GEPORT
AutoProv XEPORT
>SET INTERFACE 3.0 PROFILE=SILVER
>SHOW INTERFACE=3.0
--- GE Interfaces ---
Interface.......................... 3.0
Type............................... GE
State.............................. UP-DN-Dependency
Description........................ <none>
Remote ID.......................... <none>
External Profile................... <none>
Card Type.......................... GE24POE
Provisioning
Provisioning Profile............ SILVER