Allied Telesis SwitchBlade x3100 Series - Epsr and Superloop Command List

EPSR and (R)STP Interaction Introduction
4-149
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4.6.15 EPSR and SuperLoop Command List
This subsection provides an alphabetical reference for commands used to configure EPSR.
TABLE 4-20 EPSR Commands
Commands
ADD EPSR INTERFACE
ADD EPSR VLAN
ADD TRACE EPSR MESSAGETYPE
CREATE EPSR MASTER | TRANSIT
DELETE EPSR INTERFACE
DELETE EPSR VLAN
DELETE TRACE EPSR MESSAGETYPE
DESTROY EPSR
DISABLE EPSR
ENABLE EPSR
SET EPSR
SET EPSR INTERFACE
SETDEFAULTS EPSR
SHOW EPSR