System Cooling Introduction
1-213
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
SHOW PSU
Syntax
SHOW PSU [ ={ A | B | C | D | ALL } ] [ FULL ]
Description Shows the status of the PSUs on the SBx3112
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
manager SEC>> SHOW PSU B FULL
--- Power Supply Units ---
Slot.................................. B
Type.................................. POE
State................................. UP-UP-Online
Hardware
Model Number........................ AT-SBx3165
Serial Number....................... A043334102200026
Actual
Temperature......................... 33 degrees Celsius
1.15.3 System Cooling
1.15.3.1 Introduction
The system fan tray is identified in software as FM4 and is a removable module that consists of:
• Four fans
• Three temperature sensors
• Controller Board
Option Description Default Value
PSU Allow the user to view the configuration an status infor-
mation of the given PSU. If ALL or no value is provided
with the PSU parameter, a summary view of all PSUs is
displayed.
ALL
FULL A more detailed output of PSU information is displayed.
To Next Page
Loading...
Need help?
General
