Allied Telesis SwitchBlade x3100 Series - Classifier Command List

Introduction Configuring Classifiers
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-20
6.3.4 Classifier Command List
Ta b l e 6- 4 lists the commands that are used for Classifiers.
TABLE 6-4 Classifier Commands
Commands
ADD ACTION CLASSIFIER
ADD CLASSIFIER INTERFACE
CREATE CLASSIFIER
DELETE ACTION CLASSIFIER
DELETE CLASSIFIER INTERFACE
DESTROY CLASSIFIER
RESET CLASSIFIER COUNTER INTERFACE
SET CLASSFIER
SET QOS
SETDEFAULTS CLASSIFIER
SHOW CLASSFIER COUNTER
SHOW CLASSIFIER
SHOW QOS