System Cooling Introduction
1-221
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
SHOW SYSTEM COOLING
Syntax
SHOW SYSTEM COOLING
Description Displays various information about shelf temperature and fan conditions. Information
includes: - current readings of the shelf temperature sensors - any current faults related
to the temperature sensors - fan module information including dynamic state attributes,
alarms and defect conditions, and current fan speeds (the same information as the
SHOW FANMODULE output) N/A
Example
>SHOW SYSTEM COOLING
--- Temperature Sensors ---
Fan Tray Sensor #1.................... 27 Celsius
Fan Tray Sensor #2.................... 29 Celsius
Fan Tray Sensor #3.................... 28 Celsius
CFC Slot 4............................ not available
CFC Slot 5............................ 42 Celsius
PSU Slot A............................ not available
PSU Slot B............................ 38 Celsius
PSU Slot C............................ 42 Celsius
PSU Slot D............................ not available
--- Fan Module ---
Fan Module............................ FM4
Model Number.......................... AT-SBxFAN
Serial Number......................... 8
State................................. UP-UP-Online
Actual
Fan Speed
Fan 1............................. 2428 rpm
Fan 2............................. 2448 rpm
Fan 3............................. 2433 rpm
Fan 4............................. 2412 rpm
Cold Temperature Shutdown........... Off
To Next Page
Loading...
Need help?
General
