Allied Telesis SwitchBlade x3100 Series User Manual

Physical Interface Configuration Introduction
1-57
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1.6.3 Physical Interface Configuration
FIGURE 1-4 Connections for Management Interfaces for the SBx3112
To enable TELNET access for the management ethernet interfaces, TELNET must be enabled. The user can
then choose which interface to use and supply the IPADDRESS and SUBNETMASK for the SBx3112 that will be
used by the management device when a user logs in
1.6.4 Configuring the Management Interfaces
1.6.4.1 Configuration Procedure
The following tables show how to configure the MGMT and Inband interface.
Caution: Enabling the Inband Interface would disable the MGMT interface.
Ethernet
Management software,
PC with *TELNET/CLI,
Network Management System
Ethernet (Dedicated for Management)
Management software,
PC with *TELNET/CLI,
Network Management System
SBx31CFC
RESET
SD
CONSOLE
10/100/1000Base-T
1000 LINK ACT
10/100 LINK AC T
M/S
PSU
FAN
SBx S TATUS
1
3
5
7
9
11
0
2
4
6
8
10
L/A
CFC
RS-232
REA DY B USY FAULT
M/S
PSU
FAN
MASTER
SL AVE
NORMAL
FAULT
NORMAL
FAULT
NET MGMT
SYS S TATUS
SBx31XZ4
0123
XFP XFP XFP XFP
10G LINK / ACT
PORT ACTIVITY

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English