Allied Telesis SwitchBlade x3100 Series - Alarm Commands

Configurable Alarm Severity (Interface Alarm) Introduction
8-7
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
8.2.5 Alarm Command List
The following tables list the commands available to configure and manage Alarms on the SBx3112 switch.
TABLE 8-1 Alarm Commands
Commands
SET ALARMS THRESHOLD
SET INTERFACE ALARM SEVERITY
SETDEFAULTS INTERFACE ALARM
SHOW ALARMS
SHOW ALARMS THRESHOLD
SHOW INTERFACE ALARM SEVERITY