Allied Telesis SwitchBlade x3100 Series - Logging Command List

Introduction Logging Procedures
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-164
1.11.7 Logging Command List
This section describes the commands available to enable, configure and manage Logging.
TABLE 1-31 Logging CLI Commands
Commands
ADD LOG FILTER OUTPUT
CREATE LOG OUTPUT
CREATE LOG FILTER
DELETE LOG FILTER
DESTROY LOG FILTER
DESTROY LOG OUTPUT
DISABLE LOG OUTPUT
ENABLE LOG OUTPUT
PURGE LOG
PUT LOG FILE
SET LOG FILTER
SET LOG OUTPUT
SHOW LOG FILTER
SHOW LOG OUTPUT