Allied Telesis SwitchBlade x3100 Series - Radius and Tacacs+ Command List

Introduction Configuring a TACACS+ Server
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-80
6.8.4 RADIUS and TACACS+ Command List
The following tables list the commands available to configure and manage RADIUS and TACACS+ on the
SBx3112 switch.
TABLE 6-18 RADIUS and TACACS+ Commands
Commands
ADD RADIUS SERVER (SEC)
DELETE RADIUS SERVER (SEC)
DISABLE RADIUS SERVER (SEC)
ENABLE RADIUS SERVER (SEC)
SET RADIUS AUTHMODE (SEC)
SET RADIUS SERVER (SEC)
SHOW RADIUS
ADD TACPLUS SERVER (SEC)
DELETE TACPLUS SERVER (SEC)
DISABLE TACPLUS SERVER (SEC)
ENABLE TACPLUS SERVER (SEC)
SET TACPLUS AUTHMODE (SEC)
SET TACPLUS SERVER (SEC)
SHOW TACPLUS