Configuring Local ARP Discard Introduction
6-165
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
11.0 Discard 363 B 1.1.50.23 Static
11.0 Discard 363 B 1.1.50.24 Both
11.0 Discard 363 B 1.1.50.12 Dynamic
6.12.4 Configuring Local ARP Discard
6.12.4.1 Default Configuration
When an SBx3112 switch is initially booted up, Local ARP Discard will be configured as follows:
• No groups have been created.
• The Local ARP Discard feature has not been configured on any VLAN/interface.
To Next Page
Loading...
