Allied Telesis SwitchBlade x3100 Series User Manual

Logging Procedures Introduction
1-165
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
ADD LOG FILTER OUTPUT
Syntax
ADD LOG FILTER={filterid-list|ALL} OUTPUT=outputid
Description Used to associate existing management log filters with an existing management log output
destination. After successful execution of this command, the specified management log
output destination, if enabled, receives management logs that match the filter criteria
contained in the management log filters.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
ADD LOG FILTER=CRITICAL_log OUTPUT=TERMINAL
Option Description Default Value
FILTER The log filter that was created.
OUTPUT The outputid that was created.

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English