Allied Telesis SwitchBlade x3100 Series User Manual

Introduction ECO Functions and Lamp Test
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
1-190
SET SYSTEM ECOMODE
Syntax
SET SYSTEM ECOMODE={ ON | OFF }
Description The SBx3112-00 has a “green” energy savings mode called ECOMODE that is activated
by the user either via a front-panel ECO mode switch or by this CLI command. While
ECO mode is on, the system removes power to all LEDs on the CFCs (except for the
master/slave LED) and all port LEDs on the service modules.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
SET SYSTEM ECOMODE=ON
Option Description Default Value
ECOMODE Toggles ECOMODE as either ON or OFF OFF

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English