Custom Profiles Introduction
1-227
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
TABLE 1-47 Configuration Procedure for User profile
Step Command Description
Show the cards in the SBx3112
1
SHOW CARD
--- Card Information ---
Prov
Slot Card Type State Faults
----- --------- ---------------------------------------- ------
0 GE24POE DN-DN-NotInstalled Info
1 - - -
2 GE24POE DN-DN-NotInstalled Info
3 GE24POE DN-DN-NotInstalled Info
4 CFC200 UP-UP-Online (Active) -
5 CFC200 UP-UP-Online (Inactive) -
6 GE24POE DN-DN-NotInstalled Info
7 GE24POE DN-DN-NotInstalled Info
8 GE24POE UP-UP-Online -
9 GE24SFP DN-DN-NotInstalled Info
10 XE4 UP-UP-Online -
11 XE4 UP-UP-Online -
Show the Profiles that exist. If no profiles have been created, the are all AUTOPROV.
2
SHOW PROFILE NAMES
--- Card Profiles ---
Name Type
-------------------------------- ----------
AutoProv CFC200
AutoProv GE24POE
AutoProv GE24SFP
AutoProv XE4
--- Port Profiles ---
Name Type
-------------------------------- -------
AutoProv GEPORT
AutoProv XEPORT
Show the AUTOPROVattributes for a specific port.
To Next Page
Loading...
