Configuring the Forwarding Database Introduction
4-21
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
SHOW SWITCH INTERNALMAC
Syntax
SHOW SWITCH INTERNALMAC [ { INTERFACE={ type:id-range | id-range |
ifname-list | ALL } | CARD={ slot-list | ALL } } ] [ ADDRESS=macad-
dress ]
Description Displays the all the internal MAC addresses assigned to all the external and internal ports
of all the card types.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example
SHOW SWITCH INTERNALMAC
--- Internal MAC Address ---
Slot Interface ID Card Type MAC Address
----------- --------------- ----------- ----------------------
5 0 CFC200 00:0C:25:04:00:0C
1 1.0 GE24POE 00:0C:25:04:02:F7
1 1.1 GE24POE 00:0C:25:04:02:F8
1 1.2 GE24POE 00:0C:25:04:02:F9
1 1.3 GE24POE 00:0C:25:04:02:FA
1 1.4 GE24POE 00:0C:25:04:02:FB
1 1.5 GE24POE 00:0C:25:04:02:FC
1 1.6 GE24POE 00:0C:25:04:02:FD
1 1.7 GE24POE 00:0C:25:04:02:FE
1 1.8 GE24POE 00:0C:25:04:02:FF
1 1.9 GE24POE 00:0C:25:04:03:00
1 1.10 GE24POE 00:0C:25:04:03:01
1 1.11 GE24POE 00:0C:25:04:03:02
1 1.12 GE24POE 00:0C:25:04:03:03
1 1.13 GE24POE 00:0C:25:04:03:04
1 1.14 GE24POE 00:0C:25:04:03:05
1 1.15 GE24POE 00:0C:25:04:03:06
1 1.16 GE24POE 00:0C:25:04:03:07
1 1.17 GE24POE 00:0C:25:04:03:08
1 1.18 GE24POE 00:0C:25:04:03:09
Option Description Default Value
INTERFACE The id type, name, or ALL ALL
CARD The slot number or ALL ALL
ADDRESS A specific MAC address ALL
To Next Page
Loading...
Need help?
General
