Introduction Configuring MSTP
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-90
To destroy the instance the steps are to delete the VLAN(s) against the instance, and then destroy the instance.
9
>> show stp instance testmst
--- STP Information -----------------------------------------------
Spanning Tree Type...................... MSTP (MSTI)
Instance Name......................... testmst (10)
Instance State........................ ENABLED
(Output omitted)
Int Role State Cost Prio.Number Type
----- ---------- ---------- ---------- ----------- ------------------
1.0 DESIGNATED FORWARDING 2000 128.385 MSTP
8.1 DESIGNATED FORWARDING 200000 128.834 MSTP
---------------------------------------------------------------------
>> delete stp instance testmst vlan 10
Info (010017): Operation Successful
>> destroy stp instance testmst
Info (010017): Operation Successful
>> show stp
--- MSTP Configuration Identifier Information -----------------------
Format Selector................................ 0
Region Name.................................... region10
Revision Level................................. 10
-------------------------------------------------------------------
--- Spanning Tree Instance Summary --------------------------------
STP Instance MSTID STP State Root Port Vlan(s) Associated
----------------- -------- --------------- ---------- ------------
MAIN 0 ENABLED N/A 1-5,7-10,20,30 (etc.)
msttst 9 ENABLED N/A 6,420
(testmst is not included)
---------------------------------------------------------------------
TABLE 4-13 Configuration Procedure for MSTP
Step Command Description (Optional)
To Next Page
Loading...
Need help?
General
