EPSR and (R)STP Interaction Introduction
4-163
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
SHOW EPSR
Description Used to display the information about the EPSR domains. SHOW EPSR and SHOW EPSR
ALL command displays the summary information about all the provisioned EPSR domains
in the system. The SHOW EPSR epsrdomain command displays the detailed information
about that specific EPSR domain.
Syntax
SHOW EPSR [ ={ epsrdomain-list | ALL } ] [ { FULL | DATAVLANS } ]
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example
SHOW EPSR
--- EPSR Domain Information ---
Data
Node Ctrl Interface(s) (Phy. State, Type, Vlan
EPSR Domain Type Domain State Vlan State, Prio)Count
----------- ------- ------------ ------ ------------------------------- ------
e163 Master EN/COMPLETE 4 8.18 (UP,DNSTRM,PHYFWD,0(0)), 19
8.19 (UP,DNSTRM,PHYBLK,0(0))
test Master DIS/IDLE - - 0
videoring Master EN/COMPLETE 6 11.0 (UP,DNSTRM,PHYFWD,0(0)), 1
8.22 (UP,DNSTRM,PHYBLK,0(0))
e164 Transit EN/LINKS-UP 5 8.18 (UP,DNSTRM,PHYFWD,0(0)), 1
8.19 (UP,UPSTRM,PHYFWD,0(0))
E135 - manager SEC>> sh epsr=videoring
--- EPSR Domain Information ---
EPSR Domain Name...................... videoring
Option Description Default Value
EPSR The name(s) that have been given to the EPSR
domain(s).
ALL
FULL Provides information on both CONTROL and
DATA VLANS
DATAVLANS Lists the DATA VLAN(s) for the domain(s)
To Next Page
Loading...
Need help?
General
