Allied Telesis SwitchBlade x3100 Series User Manual

Configuring an Alias Introduction
1-21
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
SHOW ALIAS
Syntax
SHOW ALIAS [ ={ aliasname-list | ALL } ]
Description The SHOW ALIAS command allows the user to view a list of all alias commands and their
corresponding substitution strings. If the user enters a name value, that alias information
is displayed. The list of alias commands is displayed in alphabetical order. This command
may be executed by users with a USER privilege level or higher.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
>SHOW ALIAS=showvc
--- Alias Commands ---------------------------------
Alias Name Substitution String
----------------------- ---------------------------
showvc................. show vc interface all full;
Option Description Default Value
ALIAS The name of the alias for the command string.
The value can be one alias, more then one alias sepa-
rated by a comma, or ALL
ALL

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English