Introduction Configuring the Egress Port Rate Limiting
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-60
Assign each limiter to a port/port range or interface/interface range
2
ADD EGRESSLIMITER=sub_gold INTERFACE=ETH:7.0
ADD EGRESSLIMITER=sub_silver INTERFACE=ETH:7.1
ADD EGRESSLIMITER=sub_bronze INTERFACE=ETH:7.2
ADD EGRESSLIMITER=NM_limit INTERFACE=ETH:0.1
TABLE 6-12 Configuration Procedure for Egress Port Rate Limiting
Step Command Description
To Next Page
Loading...
