Allied Telesis SwitchBlade x3100 Series User Manual

Configuring the Egress Port Rate Limiting Introduction
6-67
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
SHOW EGRESSLIMITER
Syntax
SHOW EGRESSLIMITER [ ={ limitername-list | ALL } ] [ INTERFACE={
type:id-range | id-range | ifname-list | ALL } ]
Description Shows information about EGRESSLIMITERs in the system, and optionally their association
to interfaces. See CREATE EGRESSLIMITER for discussion of the use of EGRESSLMITERs
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
SHOW EGRESSLIMITER
Option Description Default Value
EGRESSLIM-
ITER
The name of the EGRESSLIMITER that has already been
created.
ALL
INTERFACE The interface(s) to be displayed for EGRESSLIMITERs

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English