Allied Telesis SwitchBlade x3100 Series User Manual

Password Recovery Introduction
1-41
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
ENABLE USER (SEC)
Syntax
ENABLE USER=login-name
Description Re-enables an account that was previously disabled. Once enabled, the associated user
can log into the system again until his/her access is disabled via the DISABLE USER com-
mand.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example ENABLE USER=coleman
Option Description Default Value
USER The login name of the user

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English