Configuring Local ARP Discard Introduction
6-167
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Enable the Local ARP Discard feature by enabling MACFF on the interface/VLAN combination, and this time
select the
MODE as LOCALARPDISCARDINGs
3
ENABLE MACFF INTERFACE=11.0 VLAN=301 MODE=LOCALARPDISCARDING
View the results
4
officer SEC>> show macff vlan=301
--- MAC Forced Forwarding Status ---
Interface Mode VLAN Group Host Type
-------------- ------- ---- -------------------- --------------- -------
11.0 Discard 301 - 1.1.50.2 Dynamic
11.0 Discard 301 - 1.1.50.3 Dynamic
TABLE 6-27 Configuration procedure for Dynamic IP Addresses
Step Command Description
To Next Page
Loading...
