Introduction Configuring DHCP Relay
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-28
CREATE DHCPRELAY
Syntax
CREATE DHCPRELAY=dhcpname [ AGENT REMOTEID={ remote-id | SHELFID |
IFDESCRIPTION | IFREMOTEID | DEFAULT } ] [ SHELFID={ shelf-id |
DEFAULT } ] [ MODE={ RELAY | SNOOPING } ] [ SERVER={ ipaddress-list
| NONE } ] [ VLAN={ vlanname-list | vid-range | ALL } ] [ CIDFOR-
MAT={ AUTO | TR101DEFAULT } ]
Description Creates a DHCP Relay instance and its attributes. Can associate with a VLAN ID. The
command can accommodate TR101 and non-TR101 formats. DHCP Relay or DHCP
Snooping is controlled with the MODE parameter. The AGENT, MODE, SERVER, and
VLAN attributes can be defined with the SET DCHPRELAY INSTANCE command as
well. In release 10.0, both binary and text formats (TR-101) are supported.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
DHCPRELAY dhcpname - the name of the DHCP instance
AGENT
REMOTEID
remote-id - the DHCP Relay agent's remote ID, which is
used DHCP servers to identify the relay agent.
SHELFID - the shelf identifier for the DHCP relay agent.
IFDESCRIPTION - interface description
IFREMOTEID - interface remote ID
DEFAULT - Shelf MAC
DEFAULT
SHELFID shelf-id - the user-specified shelf identifier for the DHCP
relay agent
DEFAULT - Shelf MAC
DEFAULT
MODE RELAY - indicates the relay agent is in relay mode
SNOOPING - indicates the relay agent is in snooping
mode; the relay agent updates the option 82 portion of
client messages without forwarding to DHCP servers
RELAY
SERVER ipaddress-list - the list of IP addresses being sent to the
DCHP server by the relay agent separated by a comma
NONE -
None
VLAN vlanname-list - list of specific VLAN(s) separated by a
comma
vid-range - VLAN range of IDs
ALL - all VLANs
None
To Next Page
Loading...
Need help?
General
