Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring DHCP Relay
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-30
DELETE DHCPRELAY VLAN
Syntax
DELETE DHCPRELAY={ dhcpname-list | MAIN | ALL } VLAN={ vlanname-
list | vid-range | ALL }
Description Disassociates a DHCP Relay instance (or set of instances) with a VLAN (or set of
VLANs).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DELETE DHCPRELAY=x3112 VLAN=420
Option Description Default Value
DHCPRELAY The name of the DHCP instance
dhcpname-list - list of specific DHCP instances
MAIN - the default DHCP instance
ALL - all DHCP instances
N/A
VLAN The name or numerical VLAN identifier being added to
the DHCP relay instance.
vlanname-list - list of specific VLAN(s) separated by a
comma
vid-range - VLAN range of IDs
ALL - all VLANs
N/A

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English