Introduction Configuring DHCP Relay
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-34
DESTROY DHCPRELAY
Syntax
DESTROY DHCPRELAY={ dhcpname-list | ALL } [ FORCE ]
Description Destroys a DHCP Relay. FORCE will override a warning that the instance still has associ-
ations.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DESTROY DHCPRELAY=x3112
Option Description Default Value
DHCPRELAY The name of the DHCP instance
dhcpname-list - list of specific DHCP instances
ALL - all DHCP instances
N/A
FORCE
Suppresses the warning
that the instance still has
associations.
N/A