Audi 2003 A8 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
27 – Starter, current supply, CCS
1 Contact corrosion
(ARL003891; Edition 08.2014)
Contact corrosion can occur if unsuitable fasteners (bolts, nuts,
washers, etc.) are used.
For this reason, only fasteners with a special surface coating are
fitted.
Furthermore, rubber components or plastic components and ad‐
hesives are made of non-conductive material.
Always fit new components if you are not sure that the old com‐
ponents are suitable ⇒ Electronic parts catalogue .
Note:
♦ We recommend the use of genuine replacement parts only;
they have been tested and are compatible with aluminium.
♦ We recommend using Audi Genuine Accessories.
♦ Damage resulting from contact corrosion is not covered by
warranty.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
1. Contact corrosion 1

Audi 2003 A8 Specifications

General

Brand	Audi
Model	2003 A8
Category	Automobile
Language	English