Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
4 Gas discharge headlights
Observe notes on contact corrosion ⇒ page 125 .
Note
The headlights must be adjusted after any repair work which
could affect the headlight settings ⇒ page 150 .
4.1 Safety precautions when handling gas
discharge bulbs
⇒ Electrical system; General information; Rep. gr. 94 ; Safety
precautions when handling gas discharge bulbs
4.2 Gas discharge headlight with cornering light/static cornering light - exploded
view
1 - Headlight housing
❑ Vehicles with LED day‐
time running lights: the
daytime running light
bulbs (LED) are integra‐
ted in the headlight
housing. The LED lights
cannot be renewed sep‐
arately; the headlight
must be renewed as a
complete unit
❑ Removing and installing
⇒ page 149
2 - Trim cover
3 - 6 Nm
4 - Bracket for headlight hous‐
ing
5 - Gas discharge bulb control
unit
❑ Left gas discharge bulb
control unit - J343-
❑ Right gas discharge
bulb control unit - J344-
❑ Removing and installing
⇒ page 172
6 - 1 Nm
7 - Seal
❑ Renew if damaged
8 - Bracket for headlight hous‐
ing
❑ To adapt headlight to
body contour, slacken
off bolt -item 10- and
swivel headlight hous‐
ing
Audi A8 2003 ➤
Electrical system - Edition 08.2014
4. Gas discharge headlights 147
To Next Page
Loading...
