Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.7 Removing and installing 12 V socket -
U5- in luggage compartment - vehicles
from 06.2004 onwards
Removing
– Remove cover on luggage compartment side trim (left-side).
– Release retaining clips -arrows- on back of luggage compart‐
ment side trim and detach 12 V socket.
– Unplug electrical connector -1-.
– Unscrew nut -4-.
– Take 12 V socket -2- out of mounting -3- for 12 V socket.
Installing
Install in reverse order.
Tightening torque
Component Nm
12 V socket to trim 2
2.8 Renewing 12 V socket - U5- - vehicles
from 06.2004 onwards
Special tools and workshop equipment required
♦ Puller - T40148-
Removing
– Release tabs -2- on puller -T40148- must engage in recesses
in 12 V socket -3- -arrow-; for this purpose, push threaded rod
-1- downwards as far as stop.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
2. Cigarette lighter, socket 103
To Next Page
Loading...
