Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unplug electrical connectors -3- and -4-.
– Release retaining clips -arrows- on back and detach
12 V sockets -1- and -2-.
Installing
Install in reverse order.
2.6 Removing and installing 12 V socket -
U5- in luggage compartment - vehicles
up to 06.2004
Removing
– Remove cover for luggage compartment side trim (left-side)
-arrows-.
– Open socket.
– Release retaining clips -arrows- on back of luggage compart‐
ment side trim and detach 12 V socket.
– Unplug electrical connector.
Installing
Installation is carried out in the reverse order; note the following:
• Socket must be open when installing.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
102 Rep. gr.90 - Gauges, instruments
To Next Page
Loading...
