Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2 Halogen headlights
Observe notes on contact corrosion ⇒ page 125 .
Note
The headlights must be adjusted after any repair work which
could affect the headlight settings ⇒ page 128 .
2.1 Halogen headlights - exploded view
1 - Headlight housing
2 - Trim cover
3 - 6 Nm
4 - Bracket for headlight hous‐
ing
5 - Bracket for headlight hous‐
ing
❑ To adapt headlight to
body contour, slacken
off bolt -item 7- and
swivel headlight hous‐
ing
6 - 6 Nm
7 - 3 Nm
8 - Main beam bulb
❑ H7 - 12 V, 55 W
❑ Renewing bulb
⇒ page 133
9 - Bulb for side lights
❑ Glass base bulb 12 V, 5
W
❑ Renewing bulb
⇒ page 134
10 - Bulb holder
❑ For bulb for side lights
11 - Main beam housing cover
❑ Release retaining tabs
to remove
12 - Adjuster
❑ To adjust headlight to
wing panel contour and bumper contour
13 - 6 Nm
14 - Locking bolt, 1 Nm
❑ For dipped beam housing cover
15 - Bulb for dipped beam headlights
❑ H7 - 12 V, 55 W
❑ Renewing bulb ⇒ page 132
Audi A8 2003 ➤
Electrical system - Edition 08.2014
126 Rep. gr.94 - Lights, bulbs, switches - exterior
To Next Page
Loading...
