Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
7.16 Removing and installing vanity mirror
light (rear)
Removing
– Remove vanity mirror (rear) ⇒ page 300 .
– Use small screwdriver to release lens -arrows-.
– Take bulb -1- (12 V, 6 W) out of clamp-type holder.
Installing
Installation is carried out in the reverse order; note the following:
– Press on lens for interior light until it engages.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
7. Lights and switches in roof trim 301