Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3 Halogen headlights (USA vehicles)
Observe notes on contact corrosion ⇒ page 125 .
Note
The headlights must be adjusted after any repair work which
could affect the headlight settings ⇒ page 140 .
3.1 Halogen headlights - exploded view
1 - Headlight housing
❑ Removing and installing
⇒ page 139
2 - Trim cover
3 - 6 Nm
4 - Bracket for headlight hous‐
ing
5 - Bracket for headlight hous‐
ing
❑ To adapt headlight to
body contour, slacken
off bolt -item 7- and
swivel headlight hous‐
ing
6 - 6 Nm
7 - 3 Nm
8 - Main beam bulb
❑ H1 - 12 V, 55 W
❑ Renewing bulb
⇒ page 143
9 - Parking light bulb
❑ Glass base bulb 12 V, 5
W
❑ Renewing bulb
⇒ page 144
10 - Bulb holder
❑ For parking light bulb
11 - Main beam housing cover
❑ Release retaining tabs
to remove
12 - Adjuster
❑ To adjust headlight to wing panel contour and bumper contour
13 - 6 Nm
14 - Locking bolt, 1 Nm
❑ For dipped beam housing cover
15 - Bulb for dipped beam headlights
❑ H7 - 12 V, 55 W
❑ Renewing bulb ⇒ page 142
Audi A8 2003 ➤
Electrical system - Edition 08.2014
138 Rep. gr.94 - Lights, bulbs, switches - exterior
To Next Page
Loading...
