Audi 2003 A8 - Removing and Installing Background Light in Storage Compartment in Door

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Removing
– Remove door trim ⇒ Rep. gr. 70 .
– Unplug electrical connectors -1- and -2-.
– Unscrew bolts -arrows- and detach door opener.
– Unplug electrical connector -1-.
– Carefully press lighting strip -2- out of door trim on back
-arrow-.
– Use removal wedge - 3409- -item 1- to carefully prise lighting
strip out of retaining clips.
Installing
Installation is carried out in the reverse order; note the following:
– Install door trim ⇒ Rep. gr. 70 .
4.4 Removing and installing background
light in storage compartment in door
Removing
– Open storage compartment in door.
– Carefully lever background light -1- out of storage compart‐
ment in door -2- using a small screwdriver.
– Unplug electrical connector.
Installing
Installation is carried out in the reverse order; note the following:
Note
If the LED is defective, the complete background light must be
renewed.
– Insert background light in opening and engage on opposite
side.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
284 Rep. gr.96 - Lights, bulbs, switches - interior