Audi 2003 A8 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
5.3 Removing and installing front seat heat‐
ing switches
The front seat heating switches are integrated into the Climatronic
control unit - J255- (may also be referred to as “front operating
and display unit”) and cannot be renewed individually.
5.4 Removing and installing rear seat heat‐
ing switches
Front seat heating switches are only integrated into rear Clima‐
tronic operating and display unit - E265- on vehicles with air
conditioner (rear) and cannot be renewed individually.
Removing
– Switch off ignition and take out ignition key.
– Take out rear ashtray.
– Unscrew bolts -arrows- and detach mounting frame with vents.
– Unplug electrical connectors.
– Detach trim -3- from mounting frame -arrows-.
– Unclip switches -1- and -2- from switch mounting.
Installing
Install in reverse order.
Tightening torque
Component Nm
Air vents to centre console (rear) 2.5
Audi A8 2003 ➤
Electrical system - Edition 08.2014
5. Lights and switches in centre console 289

Audi 2003 A8 Specifications

General

Brand	Audi
Model	2003 A8
Category	Automobile
Language	English