Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
4.9 Unplugging door separating connector
(right-side)
Procedure
– Press dust cover -1- at location marked with -arrow- and de‐
tach.
– Release door separating connector -1- and remove outwards
-arrow- (press retainer tab -2-).
– Make sure connector is pressed onto connection piece so it
engages audibly.
– Press on dust cover so it engages audibly.
Note
Make sure sealing lip of dust cover makes contact with A pillar
evenly all round.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
344 Rep. gr.97 - Wiring