Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove switch trim -1- -arrows-.
– Lift rear of switch trim -arrow 1- and detach towards inside of
storage compartment -arrow 2-.
– Unplug electrical connector.
– Release retaining hooks on left and right and press emergen‐
cy-off button to rear out of switch mounting in storage com‐
partment -arrow-.
– Unplug electrical connector -1-.
Installing
Installation is carried out in the reverse order; note the following:
– Press emergency-off button into mounting until retaining
hooks engage.
– Install door trim (front) ⇒ Rep. gr. 70 .
3.10 Removing and installing front passenger
seat adjustment switch - E157-
Removing
– Switch off ignition and take out ignition key.
– Remove rear door trim ⇒ Rep. gr. 70 .
– Detach insulating mat from door trim.
– Unscrew bolts -arrows- and detach loudspeaker trim.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
3. Lights and switches in front doors 279
To Next Page
Loading...
