Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Loosen locking bolt -1- a few turns.
– Release retaining tabs -arrows- and detach housing cover for
dipped beam headlights from headlight housing.
– Check position of adjustment lever -1- at both headlights.
• Lever down = Driving on right
• Lever up = Driving on left
– If necessary, swivel lever until it engages in desired position
-arrow-.
– Close housing cover and secure with locking bolt.
– Install front wheel housing liner ⇒ Rep. gr. 66 .
Audi A8 2003 ➤
Electrical system - Edition 08.2014
2. Halogen headlights 137
To Next Page
Loading...
