Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unscrew bolt -arrow- and detach switch mounting -1- from
armrest.
– Unscrew bolts -arrows- and detach switch mounting with mir‐
ror adjustment switch.
– Unplug electrical connector -1-.
– Use small screwdriver to carefully release retaining hooks
-arrows-.
– Pull mirror adjustment switch - E43- -item 2- downwards out
of switch mounting.
Installing
Installation is carried out in the reverse order; note the following:
Note
When installing, make sure symbol trim is inserted before the
mirror adjustment switch.
– Press switch into switch mounting until retaining hooks en‐
gage.
– Install door trim (front) ⇒ Rep. gr. 70 .
Audi A8 2003 ➤
Electrical system - Edition 08.2014
3. Lights and switches in front doors 271