Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove both front wheels.
Note
Secure brake discs with wheel bolts.
– On vehicles with auxiliary heater, unscrew bolts -arrows- for
exhaust pipe of auxiliary/supplementary heater at noise insu‐
lation.
– Open quick-release fasteners -1- and detach front noise insu‐
lation.
– Place drip tray for workshop hoist - VAS 6208- beneath en‐
gine.
– Unscrew drain plug -arrow- and drain off coolant.
– Detach coolant hose -arrow- at coolant pipe and allow remain‐
ing coolant to drain out of engine.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
36 Rep. gr.27 - Starter, current supply, CCS
To Next Page
Loading...
