Audi 2003 A8 - Page 48

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove cover for suspension strut turret (right-side) by de‐
taching spreader clip -1- and unscrewing bolt connection -2-.
– Pull cover out of retainers -arrows-.
– Remove bolts -arrows- and detach right air cleaner (top sec‐
tion).
– Unplug headlight connector -arrow- on both sides of vehicle.
– Detach oil filler neck by lifting lug -2- and turning oil filler neck
in clockwise direction -arrow-.
– Pull out clip and detach coolant hose -1- (top) from radiator.
– Install oil filler neck.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
38 Rep. gr.27 - Starter, current supply, CCS