Audi 2003 A8 - Page 67

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Move electrical wiring clear at air pipe (front).
– Remove air pipe (front right) -arrows-.
– Unplug electrical connector -1- at air mass meter - G70- .
– Unscrew bolts -arrows-.
– Detach right air cleaner (bottom section).
– Unplug electrical connector -3- if fitted.
– Remove bolts -1- and -2-.
– Remove bracket and mounting for torque reaction support.
– Unscrew coolant pipe -1- at turbocharger and detach coolant
hose -3- at coolant pipe.
Note
Leave oil supply pipe -2- connected to turbocharger.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
3. Removing and installing alternator 57